Diferență între revizuiri ale paginii „Applications 2”

De la WikiLabs
Jump to navigationJump to search
Linia 32: Linia 32:
  
 
testbench source file for the 2 by 2 bit multiplier
 
testbench source file for the 2 by 2 bit multiplier
* use control instructions '''repeat ('''''nrOfIterations''''')'''
+
* control instructions: '''repeat ('''''nrOfIterations''''')'''
 
* parallel '''initial''' blocks
 
* parallel '''initial''' blocks
  

Versiunea de la data 28 februarie 2019 06:38

Exercise 1

design source file for the 1 bit adder

  • New Verilog HDL File
  • module moduleName endmodule
  • module pins: input and output
  • multibit vectors [msb:lsb]
  • behavioral description with assign

App2 sum.png

testbench source file for the adder

  • New Verilog HDL File
  • module moduleName_tb endmodule
  • the testbench module has no pins!
  • declare logic variables reg varName
  • wire declarations, mandatory for multibit outputs
  • instantiation moduleName instanceName Usualy, the top-level design module instantiated in the testbench is named dut (device under test)
  • connections connect testbench variables to instance pins: .modulePin(varName)

generate stimuli for dut inside the testbench

  • initial
  • begin/end if more than one instruction in a block
  • assignments varName=value
  • literals, decimal literals, binary literals
  • delay #delayValue

Exercise 2

design source file for the 2 by 2 bit multiplier

  • operators in expressions

App2 mult.png

testbench source file for the 2 by 2 bit multiplier

  • control instructions: repeat (nrOfIterations)
  • parallel initial blocks

Exercise 3

design source file for top-level entity Multilevel hierarchy. Mixed description: top-level - structural description, low-level - behavioral description.

  • same module type, different instance names
  • internal wires for interinstance connections

App2 multsum.png

testbench source file for the top-level entity

  • concatenation operator {varName1, varName2, ...}
  • $monitor(%b...,varName1,...)
  • format specifiers %b for binary (logic) values, %d for decimal values