Diferență între revizuiri ale paginii „The Decoder”

De la WikiLabs
Jump to navigationJump to search
Linia 44: Linia 44:
 
The interface of a decoder is made up of two signals:
 
The interface of a decoder is made up of two signals:
 
* input of '' n '' bits;
 
* input of '' n '' bits;
* output of 2 <sup> n </ sup> bits.
+
* output of 2 <sup> n </sup> bits.
  
 
== Implementation ==
 
== Implementation ==

Versiunea de la data 10 mai 2018 06:59

The decoder is a combinational circuit which is used to identify the specified input value by setting the output of the bit on the corresponding index to the input. The decoder is equivalent to a 1-bit multiplexer and the constant data input of 1.

For example, for a 4-bit decoder, the port table is shown below (the _ character can be used in Verilog to separate bits or numbers belonging to a base in writing a constant, for ease of reading; 16'b0100_0011_0100_0111)

INTRARE EXIT
0000 0000_0000_0000_0001
0001 0000_0000_0000_0010
0010 0000_0000_0000_0100
0011 0000_0000_0000_1000
0100 0000_0000_0001_0000
0101 0000_0000_0010_0000
0110 0000_0000_0100_0000
0111 0000_0000_1000_0000
1000 0000_0001_0000_0000
1001 0000_0010_0000_0000
1010 0000_0100_0000_0000
1011 0000_1000_0000_0000
1100 0001_0000_0000_0000
1101 0010_0000_0000_0000
1110 0100_0000_0000_0000
1111 1000_0000_0000_0000

Interface

The interface of a decoder is made up of two signals:

  • input of n bits;
  • output of 2 n bits.

Implementation

There are several possible implementations for the decoder:

  • using blocks generated for;
  • using blocks always combinational and case;
  • using a block assign and the left shift operator.

Although the last variant is not optimal from the point of view of the synthesized circuit, we will use this method because of the ease and short dimension of the description.